Prodigy 48

The most intelligent solution for Remote Monitoring / Control / Power Center for Solar and UPS Battery Backup Systems.

 

This all in one unit gives complete control of Remote Solar and UPS Battery Backup Systems through the connected antenna or cellular gateway. Email alerts notify of developing events or problems at the installation site.

Vorp Energy Spec Sheets logo
Vorp Energy Prodigy 48 PoE Switch & Battery Charge Controller

Smart Selectable PoE Switch

 

  • Gigabit PoE Switch with Passive Ports (3)PoE+ 35W & (4)PoE 18W
  • Power Cycle Individual Ports Auto / Manually
  • Ports 1 – 7 Selectable as 24V, 48V or OFF by User
  • Selectable Auto Ping Watchdog Power Cycle

Bring your wireless surveillance installations into the internet age with the Vorp Energy Prodigy 48. By sending Email Alerts when User set limits are exceeded, the Prodigy keeps you in the loop on developing problems. Getting an alert when Battery Voltage drops below a set level, Temperature reaches a Min / Max or IP Address Pings fail a set number of times means cutting off minor problems before they become serious.

Remote Monitoring & Control

 

  • View System & Control through Web Interface
  • Log and Graph the History of up to 15,000 Data Sets
  • Auto Power Cycle or ON/OFF Auxiliary Power and Ports based on change in Voltage, Temperature, Time, or Ping
  • Smart Battery Charging Based on Temperature
  • Monitors and Graphs Important Data

Popular Applications

 

  • Surveillance with Antenna or Cellular Gateway
  • Remote IoT & M2M (Gas & Oil, Mines, Agriculture)
  • Wireless Bridges / Backhauls (WISP)
  • SCADA Upgrades (Gas & Oil, Agriculture)
  • UPS / Solar backup Control (Cell Towers, Utilities)
Prodigy 48 Specifications
Total Max Power Output 220W Total (150W @ 48VDC and 70W @ 24VDC) from all output ports
PoE Switch (7) RJ45 10/100/1000MB Gigabit Ethernet, Auto Crossover, Layer 2
PoE Output Voltage 48VDC or 24VDC or OFF (Adjustable in Web Interface)
PoE Output Power Port 1 – 3: 35W Passive PoE+ at 48VDC, 18W at 24VDC
Port 4 – 7: 17W Passive PoE at 48VDC, 9W at 24VDC
PoE Power supplied on pins 4,5 (V+) and 7,8(V-) (Mode B)
Aux DC Output Current 48VDC or 24VDC (Adjustable in Web Interface)
Aux DC Output Current 2.25A Maximum
Aux DC Output Controls Set in Web Interface by Temperature, Volatge, or Time
Battery Volt / Current 48VDC / 20A Max
Battery Type Sealed Lead Acid (SLA) or Lithium Iron (LiFePo4)
Solar Volt / Current Input 62 – 80 VDC, 20A Max
Fuse Type 58V 20A Fast Acting Automotive (Littelfuse 142.6185.5206)
Low Volatge Disconnect 45.8 – 47.8 VDC Adjustable in Web Interface
Recovery from LVD 45.8 – 47.8 VDC Adjustable in Web Interface
Port Surge Protection IEC 61000-4-2 (ESD) 15kV (Air), 15kV (Contact)
IEC 61000-4-4 (EFT) 40A (5/50ns)
IEC 61000-4-5 (Lightning) 25A (8/20µs)
LED Control Lights LED #1 – Overload Warning:(Red)
LED #2 – External DC Power ON:(Green)
LED #3 – Aux Out Voltage:(24VDC Green, 48VDC Orange)
LED #4 – Battery Charging:(Green)
Self Power Consumption 1 – 3 Watts (If PoE ports not in use)
Accessibility Via Web Browser and SNMP
Data-Logger FIFO, 15,000 data sets, Programmable Log
Operating Temperature -76F to 158F (-60C to 70C) Humidity (RH):0% – 90%
Dimensions (HxWxD) 5.5″ x 14″ x 5.75″
Weight 4.2Lbs
Certifications FCC/CE EN55022(EMC); CE EN55024(EMC); CE/UL EN60950-1(LVD)

Who uses Vorp Solutions?